Installation Manuals - Wall Connector
The third generation Tesla Wall Connector is designed for easy installation. An open wire box with integrated terminals provides plenty of room for landing wires, with entry point options from the top, bottom and rear. Installers can use a smartphone to commission Wall Connector and connect to customer Wi-Fi networks.
Installing a Gen 3 Wall Connector
Installers should download and fully review the Gen 3 Wall Connector installation manual prior to installation.
For more information on how to install a Gen 3 Wall Connector, watch the video below.
Wall Connector Commissioning
Wall Connector hosts a Wi-Fi network for easy commissioning of the device settings. Commissioning is required before the device will be able to charge a vehicle.
The Quickstart Guide, included in the Wall Connector Box, has a sticker on the cover page with unique product information required for commissioning. The owner of the Wall Connector should keep the Quickstart guide for future reference.
To connect to the Wall Connector’s access point with a smartphone or laptop, scan the QR code on the Quickstart Guide sticker, or manually connect to the Wi-Fi network with the SSID and password (WPA2) provided.
After connecting to the Wall Connector access point, scan the QR code below or open a web browser to navigate and navigate to http://192.168.92.1.
For more information on how to commission Gen 3 Wall Connector, watch the video below.
Wall Connector Firmware
Connect Gen 3 Wall Connector to local Wi-Fi to automatically receive firmware updates. New features and functionality will be rolled out over time.
If you have additional questions, please contact Customer Support.
To purchase a Wall Connector, visit the nearest Service Center.