Safety & Security Settings

About the Security System

If Model 3 does not detect an authenticated phone or key and a locked door or trunk is opened, an alarm sounds. The headlights and turn signals also flash. To deactivate the alarm, press any button on the mobile app or tap your key card or key fob against the card reader located just below the Autopilot camera on the driver's side door pillar.

To manually enable or disable the alarm system, touch Controls > Safety > Security Alarm. When enabled, Model 3 activates its alarm one minute after you exit, the doors lock, and a recognized key is no longer detected.

A battery-backed siren (if equipped) sounds in situations where a locked door or trunk is opened and Model 3 does not detect a key nearby. If you also want this siren to sound in situations where the vehicle detects motion inside the cabin, enable Tilt/Intrusion (see Tilt/Intrusion (if equipped)).

Informational PurposesAn informational icon, calling your attention
Note
If Model 3 is in Sentry Mode (see How to Use Sentry Mode (With a USB Flash Drive)), the Security Alarm setting is not available.

Tilt/Intrusion (if equipped)

Depending on configuration, market region, and date of manufacture, your vehicle may not be equipped with this feature.

The Security Alarm must be on to enable Tilt/Intrusion.

Tilt/Intrusion sounds the alarm in your vehicle if Model 3 detects motion inside the cabin, or is moved or tilted (for example, with a tow truck or jack). To enable, touch Controls > Safety > Tilt/Intrusion.

The intrusion sensor automatically disables in situations where the climate control system is operating when you leave your vehicle. To override, you can manually turn the Tilt/Intrusion Sensor on again after choosing Keep Climate On, Dog, or Camp Mode.

The tilt/intrusion sensor automatically re-enables at the start of every drive cycle.

Informational PurposesAn informational icon, calling your attention
Note
The Tilt/Intrusion alarm must be turned off to use Cabin Overheat Protection (see Cabin Overheat Protection).
Informational PurposesAn informational icon, calling your attention
Note
If you plan to leave something that moves inside your locked vehicle, remember to turn off Tilt/Intrusion. If this setting is on, any motion detected inside Model 3 activates the intrusion alarm.
Informational PurposesAn informational icon, calling your attention
Note
If Model 3 is in Sentry Mode (see How to Use Sentry Mode (With a USB Flash Drive)), the Tilt/Intrusion setting is not available.

Parental Controls

Parental controls enable you to limit the capabilities of Model 3 and ensure that safety settings are enabled and cannot be changed.
Informational PurposesAn informational icon, calling your attention
Note
You can also access parental controls from the Tesla mobile app (version 4.34.5 or higher required).
Informational PurposesAn informational icon, calling your attention
Note
You cannot enable Parental Controls if Speed Limit Mode is enabled.
When you enable Require Safety Features, Model 3 enables or configures these vehicle settings:
Informational PurposesAn informational icon, calling your attention
Note
Depending on market region, vehicle configuration, options purchased, and software version, your vehicle may not be equipped with the listed features.
  • Automatic Emergency Braking
  • Obstacle-Aware Acceleration
  • Automatic Blind Spot Camera
  • Blind Spot Collision Warning Chime
  • Automatic 911 Call
  • Allow Mobile Access
  • Park Assist Chimes
  • Lane Departure Avoidance: Set to Assist.
  • Speed Limit Warning: Set to Chime.
  • Forward Collision Warning: Set to Early.

If you want to enable parental controls:

  1. With your vehicle in Park, touch Controls > Safety > Parental Controls on the touchscreen.
  2. Enable or configure the parental controls you want to use:
    • Limit Speed: Caps the speed at which Model 3 can drive.
    • Reduce Acceleration: Limits the vehicle Acceleration to Chill.
    • Require Safety Features: Enables various safety features in the vehicle (if equipped). Drivers cannot change these settings while parental controls are active.
    • Send Curfew Notifications: Turns on curfew notifications from 11 PM to 4 AM. When someone shifts the vehicle to Drive after the start of curfew, a notification is sent through the Tesla mobile app to all phone keys paired with the vehicle, notifying users that Model 3 is in use.
  3. Touch Confirm.
  4. Enter a PIN.
    Informational PurposesAn informational icon, calling your attention
    Note
    Drivers must re-enter the PIN from Parental Controls to disable the restrictions. Touch Driver Profile > Parental Controls to re-enter the PIN.

PIN to Drive

For an added layer of security, prevent Model 3 from being driven until a 4-digit PIN (Personal Identification Number) is entered. To enable this setting, touch Controls > Safety > PIN to Drive and follow the on-screen prompts to create a driving PIN.

When enabled, in addition to entering the 4-digit driving PIN to drive, you must also use it to enter Valet mode for the first time and create the 4-digit valet PIN to enter and exit Valet mode. In Valet mode, Model 3 can be driven without the need for the valet to enter a driving PIN. The PIN to Drive setting is disabled whenever Valet mode is active.

If you forget your driving PIN, touch the link to enter your Tesla login credentials on the PIN to Drive popup, then follow the instructions on the touchscreen.

Informational PurposesAn informational icon, calling your attention
Note
In the unlikely event that your touchscreen is unresponsive, you may be unable to enter the PIN. In this case, first try to restart the touchscreen (see Restarting the Touchscreen). If the touchscreen is still unresponsive, you can still bypass PIN to Drive by turning on Keyless Driving in the Tesla mobile app.

Glovebox PIN

Protect the contents in your glovebox with a 4-digit PIN (not related to PIN to Drive). To enable, touch Controls > Safety > Glovebox PIN and follow the directions on the touchscreen. When enabled, you are prompted to enter the PIN to open the glovebox. Select the toggle to disable and then enter the PIN to remove this added security protection.

If you forget your glovebox PIN, reset it by entering your Tesla login credentials, then follow the directions on the touchscreen.

Informational PurposesAn informational icon, calling your attention
Note
Using a Glovebox PIN allows the glovebox to be opened even when Model 3 is in Valet mode.

Speed Limit Mode

Speed Limit Mode allows you to limit acceleration and maximum driving speed to a chosen value between 50 and 120 mph (80 and 193 km/h). The first time you use this feature, you must create a 4-digit PIN that you must use to enable and disable Speed Limit Mode. When enabled and the driving speed approaches within approximately 3 mph (5 km/h) of the maximum speed, a chime sounds, the touchscreen displays a message, and Model 3 sends a notification to the mobile app. You can also touch Security > Speed Limit Mode to enable from the Tesla mobile app. To enable Speed Limit Mode:

  1. Ensure Model 3 is in Park.
  2. Touch Controls > Safety > Speed Limit Mode on the touchscreen.
  3. Select the maximum driving speed.
  4. Drag the slider to the On position.
  5. Enter the 4-digit PIN that you want to use to enable and disable Speed Limit Mode.
    Informational PurposesAn informational icon, calling your attention
    Note
    If you forget the PIN, you can disable Speed Limit Mode by entering login credentials for your Tesla account.
Informational PurposesAn informational icon, calling your attention
Note
While Speed Limit Mode is enabled, the acceleration setting automatically sets to Chill.
Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
Driving downhill can increase driving speed and cause Model 3 to exceed your chosen maximum speed.
Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
Speed Limit Mode is not a replacement for good judgment, driver training, and the need to closely monitor speed limits and driving conditions. Accidents occur at any speed and it is your responsibility to drive safely.

Clear Browser Data

You can clear your vehicle's browser data (like you would on a computer or smartphone) by navigating to Controls > Service > Clear Browser Data. This is useful for many situations, such erasing settings or searches from another driver.

Check the boxes on the touchscreen popup to exclude bookmarks and/or history for your convenience.