Dashcam and Sentry Mode

Informational PurposesAn informational icon, calling your attention
Note
Depending on market region, vehicle configuration, options purchased, and software version, your vehicle may not be equipped with Dashcam or Sentry Mode or the features may not operate exactly as described. Please note it is your sole responsibility to consult and comply with all local regulations and property restrictions regarding the use of cameras.

In addition to supporting Autopilot, the exterior cameras can record and store video footage of the vehicle's surroundings on a USB flash drive. This can be convenient in situations where you want a video recording of a particular incident. If set to AUTO, Dashcam saves video recordings of collisions when driving. On the other hand, if enabled, Sentry Mode is the alarm system that monitors the environment around your vehicle when it is locked and in Park. After an incident is detected, Sentry Mode responds according to the level of threat detected.

Informational PurposesAn informational icon, calling your attention
Note
For saving Sentry Mode and Dashcam footage, Tesla recommends using the USB port located in the glovebox. Doing so increases security and minimizes power consumption.
Informational PurposesAn informational icon, calling your attention
Note
You can use the glovebox USB port to store a combination of dashcam, Sentry Mode, and Track Mode content in addition to audio files.
Informational PurposesAn informational icon, calling your attention
Note
Dashcam and Sentry Mode will not record video when Dashcam is OFF.
Informational PurposesAn informational icon, calling your attention
Note
To protect your privacy, video recordings are saved locally to onboard memory or the USB flash drive. Recordings are not sent to Tesla.

Using Dashcam

Dashcam records footage of your vehicle's surroundings only when Model X is powered on (see Starting and Powering Off). Dashcam does not record video when your vehicle is powered off. Use Dashcam to record driving incidents, such as a collision.

Dashcam requires a properly formatted USB flash drive, inserted into a front USB port (preferably in the glovebox) in order to store and retrieve footage (see USB Drive Requirements for Recording Videos).

Enable Dashcam by going to Controls > Safety > Dashcam and choose:

  • Auto: Dashcam automatically saves a recording to the USB flash drive in situations where Model X detects a safety event, such as a collision or airbag deployment. When Auto is selected, detection can vary and is subject to your vehicle's power, sleep, and Autopilot state.
    Informational PurposesAn informational icon, calling your attention
    Note
    Several factors determine whether or not Dashcam automatically saves a recording of a safety event (for example, amount of force, whether or not airbags deployed, etc.). Do not rely on Dashcam to automatically record video of all safety events.
  • Manual: You must touch the Dashcam icon to save a recording of the most recent 10 minutes of driving to the USB flash drive.
  • On Honk: When you press the horn, Dashcam saves a recording of the most recent 10 minutes of driving to the USB flash drive.

Once enabled, you can manually save clips by touching:

gray camera icon
The Dashcam icon in the app launcher while the vehicle is in Drive (you can add the Dashcam app to My Apps at the bottom of the touchscreen for easy access, see Customizing My Apps). The touchscreen displays a message confirming if the footage is saved. When Model X is in Park, touching the Dashcam icon brings up the Viewer.
Grey camera icon with a grey dot in indicating recording paused
The Dashcam icon on the Controls screen.

The Dashcam controls are:

Grey camera icon with a red circle in indicating recording
RECORDING: Shows that Dashcam is recording. To save video footage, touch the icon. To pause recording, press and hold the icon.
Grey camera icon with a grey dot in indicating recording paused
PAUSED: Shows that Dashcam is paused. To resume recording, touch the icon. To avoid losing video footage, pause Dashcam before removing the flash drive.
Grey camera icon with a green checkmark indicating clip saved
SAVED: Shows that footage is saved. You can also save dashcam clips by touching the Dashcam icon in the app launcher while Driving.

To view Dashcam footage, see Viewing Video Recordings.

Using Sentry Mode

When Sentry Mode is turned on, the cameras and sensors remain powered on and ready to record suspicious activity around your vehicle when Model X is locked and in Park.

To store and retrieve Sentry Mode footage, ensure that Dashcam is on and a properly formatted USB flash drive is inserted into a front USB port (preferably in the glovebox) (see Using Dashcam).

If you want Sentry Mode to automatically turn on every time you leave your vehicle, touch Controls > Sentry Mode > On. There are three additional settings for customization:

  • Exclude Home: Sentry Mode does not operate at the location you set as Home in your favorites list (see Home, Work, and Favorite Destinations), but operates at any other parking location.
    Informational PurposesAn informational icon, calling your attention
    Note
    To set up your Home location, touch Navigate and hold down Home, then enter your address. Touch Save as Home.
  • Exclude Work: Sentry Mode does not operate at the location you set as Work in your Favorites list, but operates at any other parking location. Set your Work location the same way you set your Home location.
  • Exclude Favorites: Sentry Mode does not operate at any location in your Favorites list, but activates at any other parking location.
    Informational PurposesAn informational icon, calling your attention
    Note
    To recognize a location listed as Home, Work, or a Favorite, Model X must be parked within 32 feet (10 meters) of the saved location.
Informational PurposesAn informational icon, calling your attention
Note
Sentry Mode will not record video when Dashcam is OFF.
Circle within a circle
To manually turn Sentry Mode on or off, touch Controls > Sentry.

Manually turning Sentry Mode on or off using the touchscreen or the mobile app overrides your Home, Work, or Favorite exclusion preferences until the next time you drive.

Alternatively, you can use voice commands or the Tesla mobile app. To enable Sentry Mode using voice commands, say "Keep Tesla safe," "Keep my car safe," "Sentry on," or "Enable Sentry" (see Voice Commands).

Sentry Mode requires your Battery to be at least 20% charged. If the Battery falls below 20%, Sentry Mode turns off and the mobile app sends you a notification. Power consumption may increase when Sentry Mode is active.

Informational PurposesAn informational icon, calling your attention
Note
Software updates cannot be installed when Sentry Mode is turned on.
Warning IconA warning icon, calling your attention to a possibly risky situation
CAUTION
Do not rely on Sentry Mode to protect Model X from all possible security threats. While it may help deter some threats, no security system can prevent all attacks.

To view Sentry Mode footage, see Viewing Video Recordings.

Standby, Alert, and Alarm States

While in Sentry Mode, Model X may shift through three states as a response to its surroundings—Standby, Alert, and Alarm:

  • Standby. Model X is automatically “on standby” when you activate Sentry Mode. The cameras constantly monitor the surrounding area for possible security threats.
  • Alert. If Sentry Mode detects a possible threat, such as someone very close to, or leaning on, Model X, Sentry Mode switches to the Alert state, where:
    • Headlights briefly flicker.
    • The touchscreen displays a message indicating that cameras are recording.
    • Sentry Mode saves the most recent 10 minutes of footage prior to the triggered event to the USB flash drive (if available and installed).
  • Alarm. For major threats, Sentry Mode:
    • Activates the security alarm and the audio system generates a loud and unexpected sound.
    • Sends an alert to the mobile app on phones that are paired to Model X to inform you that the alarm state is triggered.
    • Saves the most recent 10 minutes of footage prior to the triggered event to the USB flash drive (if available and installed).
    • Returns to the Standby state after 30 seconds.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Sentry Mode may not activate the security alarm in all situations involving damage to the vehicle. Sentry Mode uses many factors to determine whether to activate the security alarm—all impacts may not be detected and the alarm may not activate in all situations.
Informational PurposesAn informational icon, calling your attention
Note
When the internal storage reaches full capacity, new recordings from Alert and Alarm events overwrite the older recordings.

Sentry Mode - View Live Camera

Informational PurposesAn informational icon, calling your attention
Note
View Live Camera requires premium connectivity. It also requires that version 4.2.1 (or newer) of the Tesla mobile app is installed on a phone that has been paired as a key to Model X.

When Sentry Mode is enabled, you can use the mobile app to remotely view the area surrounding Model X as seen through the exterior cameras.

To enable, touch Controls > Safety > Sentry Mode > View Live Camera via Mobile App on the Model X touchscreen. Once enabled, ensure there are no occupants in the vehicle and all doors are closed. Then, on the Tesla mobile app, go to Safety > Sentry Mode and touch View Live Camera to see a live video feed of your vehicle’s surroundings.

In addition, if Model X is equipped with a pedestrian warning speaker (see Pedestrian Warning System), you can press and hold the microphone button on the mobile app to transmit your voice through this speaker.

When View Live Camera is actively being used, Model X may periodically flash its exterior lights and display a message on the touchscreen to notify others that the area surrounding the vehicle is being viewed through the cameras.

View Live Camera is limited to approximately one hour (or 15 minutes for some regions) of cumulative usage per day.

Informational PurposesAn informational icon, calling your attention
Note
Video and audio quality can vary depending on network connectivity.
Informational PurposesAn informational icon, calling your attention
Note
The live camera feed is fully encrypted and cannot be accessed by Tesla.

Viewing Video Recordings

You can view recorded footage on the touchscreen when Model X is in Park. Touch the Dashcam icon located in the app launcher or the Dashcam icon on the Controls screen. Touch the menu icon in the top corner of the screen. The tabs display a list of all video clips, organized by location and timestamp. Pause, rewind, fast forward, and delete video recordings as needed. You can also navigate to Controls > Safety > Delete Dashcam Clips to delete all dashcam and Sentry Mode footage, including recent and saved clips.

Informational PurposesAn informational icon, calling your attention
Note
Dashcam recording pauses when you launch the Viewer.

You can also view video footage by removing and inserting the USB flash drive into a computer and navigating to the TeslaCam (if equipped) folder.

The TeslaCam folder contains three sub-folders:

  • Recent Clips: When recording, Dashcam continuously saves footage to Recent Clips in 60-minute cycles. Footage is overwritten every hour unless you manually save it. Four videos are recorded for each clip, one from each camera (front, rear, left, and right).
  • Saved Clips: Contains all recordings that are saved using Dashcam.
  • Sentry Clips: Contains the last 10 minutes of footage from all Sentry Mode events that triggered an Alert or Alarm state. If storage space on the USB flash drive becomes limited, the oldest Sentry Clips are deleted to provide space for new ones. Once deleted, you cannot retrieve them.

When the USB flash drive runs out of storage space, video footage can no longer be saved. To prevent the flash drive from getting full, regularly move saved videos to another device and delete them from the flash drive.