Cybercab Overview

Exterior

  1. Door button: Press to open or close the Cybercab door (see Open and Close Doors).
  2. Lights: The Cybercab lightbars illuminate and change color during pick-up (see Pick-Up). The lightbars also flash hazard lights when parked for pick-up and drop-off. You can use the headlights, brake lights, and signature front and rear lightbars to help distinguish Cybercab from other vehicles at night.
  3. Hood: Cybercab is not equipped with a front trunk. The hood cannot be opened.
  4. Trunk: You can use the trunk in Cybercab to store larger items (see Open the Trunk).

Interior

The interior of Cybercab has two seats and is NOT equipped with a steering wheel, accelerator pedal, or brake pedal. There is no glove box. Both seats are available for use (see Seats and Seat Belts).

  1. Dome lights: Turn on the dome lights by touching the lens. Touch the lens again to turn off the lights.
  2. Stop button: Located between the dome lights. Press the Stop button to initiate an immediate pull over request. This ends the ride and connects you to Robotaxi Support. Use this button for emergencies only (see In Case of Emergency).
  3. Cabin camera: Cybercab is equipped with a cabin camera that helps track occupancy of the vehicle. Do not block or obscure the cabin camera.
  4. Climate control vents: Vents through which air flows to heat or cool the cabin (see Cabin Comfort).
  5. Touchscreen: You can use the touchscreen to open and close doors, start your ride, adjust cabin temperature and seats, or play music and other media (see Music, Arcade, and Media).
  6. Door lever: Gently lift the lever up to open the door or fully pull up on the lever in an emergency or if there's no power (see Open and Close Doors). When possible, open the door from the touchscreen instead of using the door lever.
  7. USB charge ports: The charge ports are USB-C.
  8. Window buttons: Press the switches under the touchscreen inwards to lower the windows and pull to raise the windows (see Cabin Comfort).

Touchscreen

  1. Door open / close: Touch to open or close the doors from the interior of Cybercab, if necessary (see Open and Close Doors).
  2. Seat controls: Recline a seat or move both seats forward or backward (see Seats and Seat Belts).
  3. Support: Touch to initiate a Support call (see Support and Disclaimers).
  4. Cabin temperature controls: Adjust the cabin temperature (see Cabin Comfort).
  5. Volume controls: Adjust the volume of media that plays in Cybercab.

There is a status bar across the top of the touchscreen. The status bar shows vehicle telltales, the status of door locks, cabin camera and microphone indicators, and the status of passenger airbags.

The App Launcher with available apps, including music, arcade, and media, appears when your trip begins (see Music, Arcade, and Media).