Support

Installing a Wall Connector

The third generation Tesla Wall Connector is designed for easy installation. An open wire box with integrated terminals provides plenty of room for landing wires, with entry point options from the top, bottom and rear. Installers can use a smartphone to commission Wall Connector and connect to customer Wi-Fi networks.

  • Installing a Gen 3 Wall Connector
  • Commissioning a Wall Connector
  • Wall Connector Firmware
  • Support


  • Installing a Gen 3 Wall Connector

    Gen 3 front
    Gen 3 bracket
    Gen 3 inside

    Download Manual

    icon see manual Installers should download and fully review the Gen 3 Wall Connector installation manual prior to installation.

    For more information on how to install a Gen 3 Wall Connector, watch the video below.

    Wall Connector Commissioning

    Wall Connector hosts a Wi-Fi network for easy commissioning of the device settings. Commissioning is required before the device will be able to charge a vehicle.

    The Quickstart Guide, included in the Wall Connector Box, has a sticker on the top of the front page with unique product information required for commissioning. The owner of the Wall Connector should keep the Quickstart guide for future reference.

    To connect to the Wall Connector’s access point with a smartphone or laptop, scan the QR code on the Quickstart Guide sticker, or manually connect to the Wi-Fi network with the SSID and Password (WPA2) provided.

    After connecting to the Wall Connector access point, scan the QR code below or open a web browser to navigate to http://192.168.92.1.

    QR code scan

    For more information on how to commission Gen 3 Wall Connector, watch the video below.

    Support

    Contact Customer Support or check these resources:

    SHARE