Safety & Security Settings
About the Security System
If Model 3 does not detect an authenticated phone or key and a locked door or trunk is opened, an alarm sounds. The headlights and turn signals also flash. To deactivate the alarm, press any button on the mobile app or tap your key card or key fob against the card reader located just below the Autopilot camera on the driver's side door pillar.
To manually enable or disable the alarm system, touch Model 3 activates its alarm one minute after you exit, the doors lock, and a recognized key is no longer detected.. When enabled,
A battery-backed siren (if equipped) sounds in situations where a locked door or trunk is opened and Model 3 does not detect a key nearby. If you also want this siren to sound in situations where the vehicle detects motion inside the cabin, enable Tilt/Intrusion (see Tilt/Intrusion (if equipped)).
Tilt/Intrusion (if equipped)
Depending on configuration, market region, and date of manufacture, your vehicle may not be equipped with this feature.
The Security Alarm must be on to enable Tilt/Intrusion.
Tilt/Intrusion sounds the alarm in your vehicle if Model 3 detects motion inside the cabin, or is moved or tilted (for example, with a tow truck or jack). To enable, touch .
The intrusion sensor automatically disables in situations where the climate control system is operating when you leave your vehicle. To override, you can manually turn the Tilt/Intrusion Sensor on again after choosing Keep Climate On, Dog, or Camp Mode.
The tilt/intrusion sensor automatically re-enables at the start of every drive cycle.
PIN to Drive
To increase security, you can prevent Model 3 from being driven until a 4-digit PIN (Personal Identification Number) is entered. To enable this setting, touch and follow the on-screen prompts to create a driving PIN.
When enabled, in addition to entering the 4-digit driving PIN to drive, you must also use it to enter Valet mode for the first time and create the 4-digit valet PIN to enter and exit Valet mode. In Valet mode, Model 3 can be driven without the need for the valet to enter a driving PIN. The PIN to Drive setting is disabled whenever Valet mode is active.
If you forget your driving PIN, touch the link to enter your Tesla login credentials on the PIN to Drive popup, then follow the on-screen prompts.
For additional security, you can protect the contents in your glovebox with a 4-digit PIN. To enable this setting, touchand follow the on-screen prompts. When enabled, you are prompted to enter the PIN to open the glovebox. To disable this setting, select the toggle to disable and then enter the PIN.
If you forget your glovebox PIN, reset it by entering your Tesla login credentials, then follow the on-screen prompts.
Speed Limit Mode
Speed Limit Mode allows you to limit acceleration and limit the maximum driving speed to a chosen value between 80 and 193 km/h. The first time you use this feature, you must create a 4-digit PIN that you must use to enable and disable Speed Limit Mode. When enabled and the driving speed approaches within approximately 5 km/h of the maximum speed, a chime sounds, the touchscreen displays a message, and Model 3 sends a notification to the mobile app. You can also touch to enable from the Tesla mobile app. To enable Speed Limit Mode:
- Ensure Model 3 is in Park.
- Touch on the touchscreen.
- Select the maximum driving speed.
- Drag the slider to the On position.
- Enter the 4-digit PIN that you want to use to enable and disable Speed Limit Mode.NoteIf you forget the PIN, you can disable Speed Limit Mode by entering login credentials for your Tesla account.