Summon
Summon allows you to automatically park and retrieve Model S while you are standing outside the vehicle. Summon moves Model S forward and reverse up to 12 meters in, or out of, a parking space.
To move Model S a longer distance while steering around objects, you can use Smart Summon (if equipped) and your mobile phone. Smart Summon allows your vehicle to find you (or you can send your vehicle to a chosen location). See Smart Summon.
Summon requires that Model S can detect a valid key nearby.
Before Using Summon
Before operating Summon, use the touchscreen to enable it and customize how you want it to work. Touch
and adjust the following settings to suit your preferences:- Bumper Clearance: Set the distance that you want Summon to stop from a detected object (for example, you may want Summon to stop within just a few inches of a garage wall). Note that this distance applies only to objects that Summon detects directly in front of Model S when moving forward, or directly behind Model S when reversing.
- Summon Distance: Set a maximum distance that Model S can travel when entering or exiting a parking space.
- Side Clearance: Choose an option to specify how much side clearance you want to allow. Tight allows Model S to enter and exit very narrow parking spaces.WarningParking in a narrow space limits the ability of the cameras and sensors (if equipped) to accurately detect the location of obstacles, increasing the risk of damage to Model S and/or surrounding objects.
- Require Continuous Press: By default, Summon requires that you press and hold a button on the mobile app to move Model S during the parking process. When Require Continuous Press is set to No, you can press and release the button—you don't need to hold it down to keep the vehicle moving. Also, when Require Continuous Press is set to No, you can operate Summon using the key fob instead of the mobile app (see Operating Summon with the Key Fob) and you can start a parking sequence from inside the vehicle (see Starting Summon Before Exiting the Vehicle).
Using Summon to Park and Retrieve your Vehicle
Follow these steps to use Summon to park your Model S:
- Align Model S within 12 meters of the parking space so Model S can follow a straight path into or out of the space in either Drive or Reverse.
- From outside the vehicle, initiate
the parking maneuver by touching Summon on the mobile
app, then holding down the Forward or Reverse button.NoteIf the Require Continuous Press setting is No, you do not need to hold down the button, just press and release.NoteYou can also initiate the parking maneuver from inside the vehicle (see Starting Summon Before Exiting the Vehicle).f
Summon shifts Model S into Drive or Reverse (based on the direction you specified) and drives into or out of the parking space. When parking is complete, or if an obstacle is detected, Summon shifts Model S into Park. Summon shifts Model S into Park when:
- Model S detects an obstacle in its driving path (within the Bumper Clearance setting that you specified).
- Summon has moved Model S the maximum distance of 12 meters.
- You release the Forward or Reverse button (when Require Continuous Press is turned on).
- You press any button to manually stop Summon.
If you used Summon to park Model S, you can then use Summon to return Model S back to its original position (provided Model S has remained in Park), or to the maximum Summon Distance that you have specified (whichever comes first). Simply specify the opposite direction on the mobile app and Summon moves Model S along the original path, provided no obstructions have been introduced. If an obstacle is detected, Model S attempts to avoid the obstacle while staying very close to its original path (Summon does not steer around obstacles).
Operating Summon with the Key Fob
Follow these steps to park Model S from outside the vehicle using the key fob:
- On the touchscreen, ensure that Require Continuous Press is disabled (touch ).
- With Model S in Park, stand within three meters and press and hold the top center button on the key fob (Lock/Unlock All button) until the hazard lights blink continuously.NoteThe hazard lights flash once as Model S locks, then within five seconds, Model S powers on and the hazard lights flash continuously. Do not proceed to the next step until the hazard lights are flashing. If, after five seconds, the hazard lights are not flashing, release the button on the key fob, move closer to Model S, and try again. If Summon receives no further input within ten seconds, Summon cancels.
- Press the Front Trunk button on the key fob to move Model S forward into the parking space, or press the Rear Trunk button to reverse Model S into the parking space.
Starting Summon Before Exiting the Vehicle
To start a Summon parking sequence before exiting Model S:
- On the touchscreen, ensure that Require Continuous Press is disabled (touch ).
- Close all doors and trunks.
- With Model S powered on and Park engaged, double press the Park button on the drive stalk. The touchscreen displays a popup screen.
- On the touchscreen, choose the direction of travel.
- Exit Model S and close the driver's door.
Summon now moves Model S according to the direction you specified on the touchscreen.
Stopping or Canceling Summon
Stop Model S at any time while Summon is active by using the mobile app or by pressing any button on the key fob. Summon also cancels when:
- A door handle is engaged or a door is opened.
- You interact with the steering wheel, brake pedal, accelerator pedal, or shift.
- Model S detects an obstacle.
- Summon has moved Model S the maximum distance of approximately 12 meters.
- Your phone enters sleep mode or loses connectivity to Model S.
Limitations
Summon is unlikely to operate as intended in the following types of situations:
- The driving path is sloped. Summon is designed to operate on flat roads only (up to 10% grade).
- A raised concrete edge is detected. Summon does not move Model S over an edge that is higher than approximately 2.5 cm.
- One or more of the sensors (if equipped) or cameras is damaged, dirty, or obstructed (such as by mud, ice, or snow, or by a vehicle bra, excessive paint, or adhesive products such as wraps, stickers, rubber coating, etc.).
- Weather conditions (heavy rain, snow, fog, or extremely hot or cold temperatures) are interfering with sensor operation.
- The sensors (if equipped) are affected by other electrical equipment or devices that generate ultrasonic waves.