Safety & Security Settings
About the Security System
If Model X does not detect a key nearby and a locked door or trunk is opened, an alarm sounds. The headlights and turn signals also flash. To deactivate the alarm, press any button on the key fob.
To manually enable or disable the alarm system, touch Model X activates its alarm one minute after you exit, the doors lock, and a recognized key is no longer detected.
. When enabled,A battery-backed siren (if equipped) sounds in situations where a locked door or trunk is opened and Model X does not detect a key nearby. If you also want this siren to sound in situations where the vehicle detects motion inside the cabin, enable Tilt/Intrusion (see Tilt/Intrusion (if equipped)).
Tilt/Intrusion (if equipped)
Depending on configuration, market region, and date of manufacture, your vehicle may not be equipped with this feature.
The Security Alarm must be on to enable Tilt/Intrusion.
Tilt/Intrusion sounds the alarm in your vehicle if Model X detects motion inside the cabin, or is moved or tilted (for example, with a tow truck or jack). To enable, touch .
The intrusion sensor automatically disables in situations where the climate control system is operating when you leave your vehicle. To override, you can manually turn the Tilt/Intrusion Sensor on again after choosing Keep Climate On, Dog, or Camp Mode.
The tilt/intrusion sensor automatically re-enables at the start of every drive cycle.
Parental Controls
- Automatic Emergency Braking
- Obstacle-Aware Acceleration
- Automatic Blind Spot Camera
- Blind Spot Collision Warning Chime
- Automatic 911 Call
- Allow Mobile Access
- Park Assist Chimes
- Lane Departure Avoidance: Set to Assist.
- Speed Limit Warning: Set to Chime.
- Forward Collision Warning: Set to Early.
If you want to enable parental controls:
- With your vehicle in Park, touch on the touchscreen.
- Enable or configure the parental
controls you want to use:
- Limit Speed: Caps the speed at which Model X can drive.
- Reduce Acceleration: Limits the vehicle Acceleration to Chill.
- Require Safety Features: Enables various safety features in the vehicle (if equipped). Drivers cannot change these settings while parental controls are active.
- Send Curfew Notifications: Turns on curfew notifications from 11 PM to 4 AM. When someone shifts the vehicle to Drive after the start of curfew, a notification is sent through the Tesla mobile app to all phone keys paired with the vehicle, notifying users that Model X is in use.
- Touch Confirm.
- Enter a PIN.NoteDrivers must re-enter the PIN from Parental Controls to disable the restrictions. Touch to re-enter the PIN.
PIN to Drive
For an added layer of security, prevent Model X from being driven until a 4-digit PIN (Personal Identification Number) is entered. To enable this setting, touch and follow the on-screen prompts to create a driving PIN.
When enabled, in addition to entering the 4-digit driving PIN to drive, you must also use it to enter Valet mode for the first time and create the 4-digit valet PIN to enter and exit Valet mode. In Valet mode, Model X can be driven without the need for the valet to enter a driving PIN. The PIN to Drive setting is disabled whenever Valet mode is active.
If you forget your driving PIN, touch the link to enter your Tesla login credentials on the PIN to Drive popup, then follow the instructions on the touchscreen.
Glovebox PIN
Protect the contents in your glovebox with a 4-digit PIN (not related to PIN to Drive). To enable, touch
and follow the directions on the touchscreen. When enabled, you are prompted to enter the PIN to open the glovebox. Select the toggle to disable and then enter the PIN to remove this added security protection.If you forget your glovebox PIN, reset it by entering your Tesla login credentials, then follow the directions on the touchscreen.
Speed Limit Mode
Speed Limit Mode allows you to limit acceleration and maximum driving speed to a chosen value between 80 and 193 km/h. The first time you use this feature, you must create a 4-digit PIN that you must use to enable and disable Speed Limit Mode. When enabled and the driving speed approaches within approximately 5 km/h of the maximum speed, a chime sounds, the instrument cluster displays a message, and Model X sends a notification to the mobile app. You can also touch to enable from the Tesla mobile app. To enable Speed Limit Mode:
- Ensure Model X is in Park.
- Touch on the touchscreen.
- Select the maximum driving speed.
- Drag the slider to the On position.
- Enter the 4-digit PIN that you want to use to enable and disable Speed Limit Mode.NoteIf you forget the PIN, you can disable Speed Limit Mode by entering login credentials for your Tesla account.
Clear Browser Data
You can clear your vehicle's browser data (like you would on a computer or smartphone) by navigating to
. This is useful for many situations, such erasing settings or searches from another driver.Check the boxes on the touchscreen popup to exclude bookmarks and/or history for your convenience.