Sentry Mode
When enabled, your vehicle's cameras and sensors (if equipped) remain powered on and ready to record suspicious activity around your vehicle when Model Y is locked and in Park. Think of Sentry Mode as an intelligent vehicle security system that alerts you when it detects possible threats nearby.
- Pulses the headlights.
- Sounds the alarm.
- Displays a message on the touchscreen that indicates cameras may be recording to inform individuals outside of the vehicles.
- Alerts you of the alarm on the mobile app.
- Saves footage of the event to a USB drive (if installed).
Sentry Mode is disabled by default. You can use voice commands or the Tesla mobile app to easily enable or disable Sentry Mode. To enable Sentry Mode using voice commands, say "Keep Tesla safe," "Keep my car safe," "Sentry on," or "Enable Sentry" (see Voice Commands).
Sentry Mode requires your Battery to be at least 20% charged. If the Battery falls below 20%, Sentry Mode turns off and the mobile app sends you a notification. Power consumption may increase when Sentry Mode is active.
How to Use Sentry Mode (With a USB Flash Drive)
- Sentry Mode requires a properly
formatted USB drive inserted in your vehicle's USB port. Vehicles manufactured beginning
approximately 2020 are equipped with a pre-formatted USB flash drive in the
glove box. There are two ways to format the USB drive:
- Insert the USB drive into the USB port and navigate to . Your vehicle automatically formats the USB drive for you.
- Format the USB drive on a computer. See USB Drive Requirements for Recording Videos for more information.
- Insert the USB drive into the vehicle's USB port, preferrable the one in the glove box (if equipped).
- With your vehicle in Park, enable Dashcam by navigating to (Dashcam must be enabled for Sentry Mode to work).
- Touch in Controls turns red. NoteRear camera recordings are available only on vehicles manufactured after approximately February 2018.
When enabled, Sentry Mode is idle, ready to sound the alarm and save a recording of the security event if triggered. See Viewing Video Recordings for information on viewing footage.
. Once enabled, the Sentry Mode icon - To silence the security alarm and audio system when the alarm is triggered, navigate to . When enabled, Sentry Mode still sends a notification through the mobile app and saves the last 10 minutes footage.
- To manually enable/disable Sentry Mode until the next drive, touch the Sentry Mode icon. Sentry Mode is Off when the icon is no longer red.Turn Sentry Mode Off in to disable for more than one drive cycle.
How to Use Sentry Mode (Without a USB Flash Drive)
When Sentry mode is enabled and a security event is detected but without a USB drive plugged into a USB port, your vehicle alerts you through the mobile app, without any camera recordings.
Sentry Mode Settings
-
Exclude specific
locations
In Home, Work, and Favorite Destinations for more information):
, you can determine if you want Sentry Mode to not enable in certain locations (see- Exclude Home: Sentry Mode does not automatically enable at the location set as Home in your Favorites list.
- Exclude Work: Sentry Mode does not automatically enable at the location set as Work in your Favorites list.
-
Exclude
Favorites: Sentry Mode does not automatically enable at any location
in your Favorites list.NoteTo recognize a location listed as Home, Work, or a Favorite, Model Y must be parked within approximately 500 meters of the saved location.
To set up your Home or Work location, touch Favorite, touch the star when viewing an address on the map. Manually turning Sentry Mode on or off using the touchscreen or the mobile app overrides your Home, Work, or Favorite exclusion preferences until your next drive.
. To set up a -
Set Camera-Based Detection
When Camera-Based Detection is enabled, Sentry Mode uses the vehicle’s external cameras in addition to vehicle sensors to detect a security event while parked. If disabled, your vehicle only saves clips to the USB drive if a physical threat is detected. To adjust, touch .
-
View
Live Camera
NoteView Live Camera requires premium connectivity and version 4.2.1 (or newer) of the Tesla mobile app installed on a phone that has been paired as a key to Model Y.
When Sentry Mode is enabled, use the mobile app to remotely view the area surrounding Model Y as seen through the exterior cameras. To enable, touch on the touchscreen to see what Sentry Mode records in real-time. Ensure there are no occupants in the vehicle and all doors are locked. Then, on the mobile app, navigate to .
When View Live Camera is actively in use, Model Y periodically flashes its exterior lights and displays a message on the touchscreen to notify others that the area surrounding the vehicle is being viewed through the cameras.
View Live Camera is limited to approximately 15 minutes of cumulative usage per day.
You can also enable Dog Mode at the same time and switch the live camera view to see through the interior camera on the mobile app. See Keep Climate On, Dog, and Camp for more information. This feature is not supported in vehicles with Autopilot computer 2.0 or 2.5. Touch to find out which computer your vehicle has.
NoteIf Dog and Sentry are enabled at the same time, Sentry defaults to Disable Sentry Sounds to protect your pet.NoteVideo quality can vary depending on network connectivity. No audio is captured.NoteThe live camera feed is fully encrypted and cannot be accessed by Tesla.