Certification Conformity

FCC and ISED Certification

Component Manufacturer Model Operating Frequency (MHz) FCC ID IC ID
B-Pillar endpoint Tesla 1783148 13.56, 2400-2483.5, 6000-8500 2AEIM-1783148 20098-1783148
Interior endpoint Tesla 1815669 2400-2483.5, 6000-8500 2AEIM-1815669 20098-1815669
Rear left BLE Tesla 1817073 2400-2483.5, 6000-8500 2AEIM-1817073 20098-1817073
Vivaldi Endpoint Tesla 1752108 2400-2483.5, 6000-8500 2AEIM-1752108 20098-1752108
Fascia endpoint Tesla 1733130 2400-2483.5, 6000-8500 2AEIM-1733130 20098-1733130
TPMS Tesla 1472547G 2400-2483.5 2AEIM-1472547G 20098-1472547G
TPMS Tesla 1849171 2400-2483.5 2AEIM-1849171 20098-1849171
Glove Box BT USB Module Tesla 1776863 2400-2483.5 2AEIM-1776863 2AEIM-1776863
In-cabin radar (if equipped)* Tesla 1616631 60000-64000 2AEIM-1616631 20098-1616631
Homelink (if equipped) Gentex ADHL5C 286-440MHz NZLADHL5C 4112A-ADHL5C
TCU Tesla 1727111 -- XMR2020AG525RGL XMR202303AF51Y 10224A-2020AG525R 10224A-202201AF51Y
Wireless phone charger Tesla WC5 13.56 MHz, 127.72 KHz 2AEIM-WC5 20098-WC5

* The in-cabin radar is restricted to factory installation.

The devices listed above comply with Part 15 of the FCC rules and Industry Canada's license-exempt RSS Standard(s) and EU Directive 2014/53/EU.

Operation is subject to the following two conditions:
  1. This device may not cause harmful interference; and
  2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by Tesla could void your authority to operate the equipment.

Radio Frequency Information

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician to help.
Warning IconA warning icon, calling your attention to a possibly risky situation
CAUTION
This equipment and its antennas must not be co-located or operated with another antenna or transmitter.

China

CMIIT IDs

HomeLink: 2016DJ6564

微功率设备使用说明

(一)符合“微功率短距离无线电发射设备目录和技术要求”中通用微功率设备C 类设备技术要求,内置环状NFC天线,工作频率13560kHz, 10m处磁场强度不大于42dBuA/m(准峰值检波) ,用户可根据说明书来使用此功能;

  (二)不得擅自改变使用场景或使用条件、扩大发射频率范围、加大发射功率(包括额外加装射频功率放大器),不得擅自更改发射天线;

  (三)不得对其他合法的无线电台(站)产生有害干扰,也不得提出免受有害干扰保护;

  (四)应当承受辐射射频能量的工业、科学及医疗(ISM)应用设备的干扰或其他合法的无线电台(站)干扰;

  (五)如对其他合法的无线电台(站)产生有害干扰时,应立即停止使用,并采取措施消除干扰后方可继续使用;

  (六)在航空器内和依据法律法规、国家有关规定、标准划设的射电天文台、气象雷达站、卫星地球站(含测控、测距、接收、导航站)等军民用无线电台(站)、机场等的电磁环境保护区域内使用微功率设备,应当遵守电磁环境保护及相关行业主管部门的规定;

(七)禁止在以机场跑道中心点为圆心、半径5000米的区域内使用各类模型遥控器;

  (八)微功率设备使用温度为-40 - 85°C, 由汽车电池供电。